Leveraging SD-WAN for End-to-End Multi-cloud Management

Unified Communications, Network Security

Article | July 10, 2023

5G is a little higher at 3.4GHz to 3.6GHz, but that's tiny when you consider that microwaves go up to 300GHz. And visible light comes in at a range of around 430THz to 770THz. That's more than a thousand times higher than the maximum microwave – and 100,000 higher than 5G. Dangerous radiation, like UV rays, X-rays and gamma rays are also far higher up the spectrum still. Early theories suggested 5G could lead to cancer – and now crackpots have linked it to coronavirus too. But it's simply impossible for 5G to cause any of these problems. Radiation damages cells by breaking them apart, but 5G microwaves simply lack the power to do this. 5G is a low-frequency radiation, far below infrared and visible light. In fact, it's essential that 5G is low-frequency, because higher frequencies are less useful at delivering mobile signals over large areas. We know that this level of radiation is safe, because otherwise the visible light from our televisions would have killed us a long time ago.

Enterprise Mobility

Article | June 15, 2023

Since my last blog post warning about those who were predicting a "new paradigm" of shortage in the semiconductor industry, the media have been shouting about the "chip crisis" alongside the typical daily news diet of disaster and calamity that we have come to expect in the time of COVID. The chip shortage coverage helped create a sense of national anxiety that we were all too reliant on China for semiconductors and, in general, that semiconductor supply was dwindling. The predictable response from governments around the world was to announce plans to stimulate their respective domestic semiconductor manufacturers into expanding chip production capacity. Fast forward a few months, and we are now finally seeing some light at the end of the chip shortage tunnel. Yet, in the wake of all the proclamations and commitments about investing in new chip capacity, we also now see manufacturers going forward with actually starting to build new plants that won't come online for another couple of years. The result, as I said in my last post: overcapacity.

Data Center Networking

Article | July 5, 2023

Applications of AI/ML Modern businesses are adopting Artificial Intelligence (AI) that encompasses disciplines like machine learning (ML), natural language processing (NLP), evolutionary computation, etc., to increase their productivity and management capabilities. Companies like Qualcomm are using AI and machine learning to improve their customer experience. “Across many industries, we are currently experiencing the creation of intelligent machines that is using AI to simulate smart behavior.” -Dr. Vinesh Sukumar, Senior Director- Head of AI/ML Product Management at Qualcomm, ( in an interview with Media7) The application of machine learning in networking is swiftly taking shape. However, as the problems in modern computer networks are getting tedious to handle, AI tools are being introduced to hard-carry their smooth functioning. Let’s take a look at how network complexity impacts businesses: Difference in Network Parameters Different client devices like laptops, smartphones, CCTV cameras, etc., are connected to a single network. However, their requirements and parameters are different. Therefore, the IT team of the business needs to meet them without compromising the functionality and security of the network. Users Prefer Wireless Networks Wireless networks are more complex than wired ones. They perform dynamically depending on the number of users, applications, and other variables. Impact of Cloud Computing Most applications are now cloud-based, and such a network has multiple data entry points and requires more support. User Experience Deciphering root cause analysis, finding correlation and solutions becomes tedious without an AI/ML model. Complex patterns remain unanalyzed, and this creates a vacuum between the customer and the business. What Does ML Bring to the Table? Machine learning applications in networking correlate to solving four types of network problems: clustering, extraction, regression, and classification. For classification and regression, ML clusters similar data and creates a gap between data groups. It then successfully maps a new set of data to a pre-set continuously valued output. As for extraction, it easily establishes a statistical relationship between the data it analyzes. Machine learning applications in networking encompass the following: Automation and Cognitive Computing ML enables automation in data processing by eliminating the human error factor and constantly improving with time. It analyzes data, improves the productivity, security, and health of the network. Cognitive computing allows processing diverse data sets, detecting and finding root causes and common traits within the system. Network Monitoring & Security Network monitoring is used to solve problems in a large dataset by deciphering the hidden pattern in the data. It then predicts the outcome for clustered data, malware attacks, or impending network failure. It recognizes impending threats in time and sends out warnings. ML uses anomaly-based intrusion, misuse-based intrusion, or hybrid intrusion to prevent misuse, modification, unauthorized access, or malfunction. Traffic Prediction, Classification, and Routing Network traffic prediction is important to handle any mishaps proactively. Network analysis in machine learning is done by using Time Series Forecasting (TSF). By using a regression model solution, TSF finds a correlation between the traffic volume in the future and the traffic previously observed. Traffic classification ensures Quality of Service (QoS), planning ahead for capacity, security, performance analysis, etc. It helps with proper resource utilization by pinpointing unnecessary traffic in a critical application. Factors like cost-effectiveness, link utilization, operational capabilities, and policies are also considered by the ML model. Congestion Control ML models control the number of packets that enter a network to ensure that the network is stable, fairly utilize resources, and follow queue management employed for congestion control. Efficiently Managing Resources ML efficiently manages network resources like the CPU, frequency, switches, memory, routers, etc., by using analytical decision-making. ML Learning Curve ML models learn in the following ways: Pitfalls Like any other technology, machine learning application in networking comes with pitfalls and limitations. Here are a few: Data Quality The efficiency of an ML model is based on the quality, quantity, and diversity of data it processes so it can deduce patterns or identify root causes. Most ML models use simplistic synthetic data for training, validation, and performance. The same cannot be said about practical settings because the data comes from different applications and services and is more complex. Feasibility There are scalability and feasibility issues because each network and application is different. Moreover, there are no set standards for uniformity for implementation which makes it hard to set benchmarks or best practices. Control over autonomic networks is distributed and remains limited based on the vendor’s specific devices. Predictive Analysis and Its Cost Network analysis and machine learning prediction require additional accurate and effective monitoring investments. Moreover, fault management may have some potholes as there may be a scarcity of normal fault data. High FPR (False Positive Rates) Anomaly detection by ML in networking has not created enough buzz in the industry because it generates high FPRs during operations. Also, no detailed anomaly report is generated, so no anomaly history log can be maintained. Striking a Balance ML requires time to learn and mitigate issues. It is difficult to identify, in advance, how complex the ML’s approach will be. Striking a balance between the performance and computational cost is difficult. Deciphering comprehensive evaluation metrics is also a tedious task. No Theoretical Model There is no theoretical model, in turn, a unified theory, for ML in networking, so each network may have to be learned separately. The current machine learning applications in networking are made keeping in mind certain applications. Over time, more research to tailor ML for certain networks needs to be done. Cross-domain experts who understand both ML and networking are also rare. Solutions Software Defined Networking (SDN) CISCO helped PwC Italy set up a secure network at their new twenty-eight-floor tower with the help of their SD-Access product. PwC wanted a secure, robust network with increased Wi-Fi and wired connectivity for their 3000 employees by streamlining network operations. “We needed a robust and highly reliable wireless network infrastructure that’s as advanced as the tower itself.” -Simone Demaria,Network Architect and Infrastructure Manager at PwC Italy By applying Software Defined Network (SDN), IT personnel can remotely govern network policies in real-time through open interfaces, so traffic engineering is easily possible. SDN also contributes to network virtualization. SDN supports the upcoming 5G ecosystem. When combined with NFV and VNF, SDN can revolutionize networking. Going Beyond Traffic Volume & Prediction To tackle the limitations that TSF-based traffic prediction models have, leveraging features beyond traffic prediction and concentrating on traffic interpolation and sampling could be viable. Research is ongoing on this possibility. Summing It Up As the influx of data keeps on increasing, the complexity of networks will increase in tandem. For successfully implementing ML for streamlining networking, the ML approaches we are aware of today need to be upgraded to accommodate multi-layer networks and multi-tenancy so autonomic networking can be a reality. FAQs How Can ML Help in Making Networking Smarter? ML can streamline the network by automation, threat detection, and improving its performance. How Complex Is Integrating ML into Networking? The complexity depends on the type of network you are integrating it into. What to Keep in Mind Before Using Ml in Networking? Consider investment costs, data availability, feasibility, and scalability. { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{ "@type": "Question", "name": "How Can ML Help in Making Networking Smarter?", "acceptedAnswer": { "@type": "Answer", "text": "ML can streamline the network by automation, threat detection, and improving its performance." } },{ "@type": "Question", "name": "How Complex Is Integrating ML into Networking?", "acceptedAnswer": { "@type": "Answer", "text": "The complexity depends on the type of network you are integrating it into." } },{ "@type": "Question", "name": "What to Keep in Mind Before Using Ml in Networking?", "acceptedAnswer": { "@type": "Answer", "text": "Consider investment costs, data availability, feasibility, and scalability." } }] }

Article | July 6, 2021

With continuous development and wide application of new-generation information technologies, digitalization, networkization, and intelligentization have become important directions of economic and social transformation and upgrade. The development and application of Artificial Intelligence (AI), blockchain, cloud computing, and the Internet of Things (IoT) all depend on data. Thus, data has become a production factor and the basis of digital economy. Data in the digital era can be compared to petroleum in the industrial era. However, data is intangible and infinite, and there’s a HUGE amount of data being generated every minute. How to make good use of data to create value has become the key to success in the era of digital economy.